Skip to content

Guide

US vs imperial units: what’s the difference?

An American and a Briton can both order a pint and get different amounts. Here is exactly which units the two systems share, which they don’t, and how big the gaps are.

By Mark Stoumann ·

The United States and the United Kingdom inherited the same family of English measures, then reformed them separately, and each settled on a different gallon. The result is two systems that use the same words for different amounts, which matters most when you follow a recipe, compare fuel economy or read a label from the other side of the Atlantic.

What the two systems share

Lengths and everyday weights are identical. The United States has used the international yard of exactly 0.9144 meters and the international pound of exactly 0.45359237 kilograms since a federal notice in 1959, and British law defines the yard and pound with the same numbers. Everything built from those two values matches on both sides:

  • Length: the inch (exactly 2.54 cm), foot, yard and mile are the same in London and Los Angeles. So are road speeds in miles per hour: 160 km/h is 99.4 mph on either side, as the km/h to mph converter shows.
  • Weight: the ounce, the pound and the troy ounce used for gold and silver are the same too. NIST’s Handbook 44 notes that Britain’s yard and pound are identical to the American units of the same names.

One American exception lasted until recently. US land surveys used a slightly longer survey foot, 1200/3937 of a meter, which differs from the international foot by two parts in a million. That is tiny for a bookshelf but adds up to about 3.2 meters over 1,000 miles, which matters on a map. NIST and NOAA retired it at the end of 2022; since 1 January 2023 every US foot is the international 0.3048 m, apart from historic records.

Where they differ: volume

The US gallon is defined as 231 cubic inches, which works out to exactly 3.785411784 liters. The imperial gallon, used in the UK, is defined in British law as exactly 4.54609 liters. It was originally defined as the volume of 10 pounds of water, which is why it doesn’t come out to a round number of cubic inches. The imperial gallon is about 20% larger, and every unit made from it follows suit, with one twist: the fluid ounce.

UnitUSImperial (UK)Bigger one
Gallon3.785411784 L4.54609 LUK, by 20.1%
Quart (¼ gallon)946.35 ml1,136.52 mlUK, by 20.1%
Pint (⅛ gallon)473.18 ml568.26 mlUK, by 20.1%
Fluid ounce29.57 ml (1/128 gallon)28.41 ml (1/160 gallon)US, by 4.1%
Fluid ounces per pint1620–

So a US fluid ounce is slightly bigger than a British one, yet a US pint is noticeably smaller, because it holds 16 of them instead of 20. If a recipe or a bottle says “fl oz”, the difference is small enough to ignore for a sauce, but at the scale of pints and gallons a fifth is a lot.

The United States also has a separate set of dry measures for grain and produce. A US dry pint is 33.6 cubic inches, about 0.551 liters, bigger than a liquid pint. You will mostly meet it in bushels and pecks at farm markets, not in recipes.

Where they differ: heavy weights

Pounds match, but the units for heavier loads don’t. Britain kept a chain of 14 pounds to the stone, 8 stone (112 pounds) to the hundredweight, and 20 hundredweight to the ton. The United States dropped the stone and made the hundredweight a round 100 pounds, so its ton is 2,000 pounds.

UnitUSImperial (UK)
StoneNot used14 lb (6.35 kg)
Hundredweight100 lb (45.36 kg), the short hundredweight112 lb (50.80 kg), the long hundredweight
Ton2,000 lb (907.18 kg), the short ton2,240 lb (1,016.05 kg), the long ton

The metric ton, or tonne, of 1,000 kg falls neatly between the two, which is why “ton” in a news story can mean any of three amounts within 12% of each other. When the source doesn’t say which, look at where it was written, or check whether the figure is given in kilograms anywhere else.

Where it trips people up

Fuel economy

Miles per gallon depends on which gallon. Because the imperial gallon is bigger, the same car gets a higher mpg figure in a British review than in an American one. Multiply UK mpg by 0.833 to get US mpg. The safest comparison is liters per 100 km, which most of the world uses:

UK mpgUS mpgL/100 km
3025.09.4
4033.37.1
5041.65.6

To go from mpg to L/100 km, divide 235.2 by US mpg, or 282.5 by UK mpg.

Pints in the pub and on the label

A pint of beer in a British pub is an imperial pint of 568 ml; UK law still allows the pint for draught beer and cider, and for milk in returnable bottles. In the United States, a pint means the US pint of 473 ml, about 95 ml less. Packaged drinks usually show milliliters as well, so check those when it matters.

Recipes

Older British recipes give liquids in imperial pints and fluid ounces, while American ones use US cups (8 US fluid ounces each). If a British recipe asks for “half a pint of milk”, that is 284 ml, not the 237 ml of a US cup. US nutrition labels use yet another cup: the FDA rounds it to 240 ml for serving sizes. For baking, weighing is safest; our guide to converting American recipes walks through cups, butter and eggs.

How to tell which unit you’re looking at

  • Look at where it was written. American sources mean US units. British sources, especially older ones, mean imperial ones.
  • Check the pint-to-fluid-ounce ratio. If a pint is described as 20 fl oz, it’s imperial; if 16 fl oz, it’s US.
  • Prefer the metric figure when a label gives both. It is the only one that means the same everywhere.

Every volume on UnitFlipr is labeled US or imperial, so you can pick the right one in the volume converter. And since both systems are now defined in metric terms, the conversions are exact: our guide to how the metric units are defined explains what they in turn rest on.

Frequently asked questions

Is a UK pint bigger than a US pint?

Yes, by about 20%. An imperial pint is exactly 568.26125 ml and a US liquid pint 473.176473 ml. The imperial pint holds 20 imperial fluid ounces, the US pint 16 US fluid ounces.

Why is a US fluid ounce bigger than a UK one if the US pint is smaller?

Because the gallons are split differently. The US gallon is divided into 128 fluid ounces and the imperial gallon into 160. The US fluid ounce is about 4% larger, but with only 16 of them in a US pint against 20 in an imperial pint, the US pint ends up smaller.

Are inches, feet and pounds the same in the US and the UK?

Yes. Since 1959 both countries use the international yard of exactly 0.9144 meters and the international pound of exactly 0.45359237 kilograms, so inches, feet, yards, miles, ounces and pounds are identical. The differences are in volumes and in the larger weights: tons and hundredweights.

How do I compare UK and US miles per gallon?

Multiply UK mpg by about 0.833 to get US mpg, or divide US mpg by 0.833 to get UK mpg. A car doing 40 mpg in a UK review does about 33.3 mpg in US terms. Converting both to liters per 100 km also removes the doubt.

What is a short ton and a long ton?

A short ton is the US ton of 2,000 pounds (907.18474 kg). A long ton is the British ton of 2,240 pounds (1,016.0469088 kg). A metric ton, or tonne, is 1,000 kg and sits between the two.